Question 1

Do you serve Greenville, Greenville County?

Accepted Answer

Yes — Four Seasons Building & Remodeling works Greenville every week. From historic Augusta Road bungalows and craftsman homes downtown to new construction in Five Forks and Hollingsworth, we know the city block by block. As a fully licensed SC general contractor (License #RB52147), we handle every permit and inspection required for windows & doors in Greenville County.

Question 2

How quickly can you start a windows & doors project in Greenville?

Accepted Answer

Most Greenville windows & doors projects can be scoped within a week of your free consultation. Build start depends on permitting and material lead times, but our local crews and supplier relationships keep Greenville County projects moving faster than most out-of-area contractors.

Question 3

How much do replacement windows cost in South Carolina?

Accepted Answer

Replacement windows in Upstate SC typically cost $400 to $1,200 per window installed, depending on the style, material, and energy efficiency rating. A full-home window replacement for an average-sized home may range from $8,000 to $20,000. We provide free estimates with detailed pricing.

Question 4

What type of windows are best for energy efficiency in SC?

Accepted Answer

Double-pane vinyl or fiberglass windows with Low-E glass coatings are ideal for South Carolina's climate. They reduce heat transfer, keeping your home cooler in summer and warmer in winter. Energy Star certified windows can significantly reduce your utility bills year-round.

Question 5

How long does window replacement take?

Accepted Answer

Most window replacements take 1 to 3 days for a full home, depending on the number of windows and any custom sizing requirements. Each window typically takes 30-60 minutes to install. We work efficiently to minimize disruption to your daily routine.

Question 6

Do new windows increase home value?

Accepted Answer

Yes, new windows are one of the top home improvements for return on investment. In the Upstate SC market, window replacement typically returns 70-80% of the investment at resale while also reducing energy costs immediately. They also significantly improve curb appeal.

Question 7

Should I replace all windows at once or gradually?

Accepted Answer

While replacing all windows at once is typically more cost-effective per window and ensures consistent appearance, we understand budget constraints. We can help you prioritize which windows to replace first based on condition, energy loss, and visibility for the best impact.

Question 8

What's the difference between full-frame and insert (pocket) window replacement?

Accepted Answer

Full-frame replacement removes the entire window down to the rough opening — old jamb, sill, exterior trim and all — and installs a new window with new flashing and a fresh weather-tight seal. It costs more (typically $200–$400 per window extra) but is the right call when the existing frames are rotted, the flashing is failing, or you're already re-siding. Insert replacement keeps the existing jamb and slides a new window unit into it — faster, cheaper, and a great fit when the frames are sound. We inspect every opening at the assessment and tell you honestly which approach makes sense per window.

Question 9

Vinyl, fiberglass, wood, or aluminum-clad — what window material should I pick?

Accepted Answer

Vinyl is our most-installed window in the Upstate — strong value, low maintenance, and modern double-pane vinyl easily hits Energy Star for our climate. Fiberglass is more dimensionally stable, accepts paint, and is the right step-up for larger window openings or high-end aesthetics ($150–$400 more per window). Aluminum-clad wood (Andersen, Marvin, Pella architectural lines) is the premium choice for historic-style and architect-driven homes. We rarely recommend bare aluminum — it conducts heat and is poorly suited to South Carolina's humidity.

Question 10

What about entry doors and patio doors — do you handle those too?

Accepted Answer

Yes. Entry door replacement (fiberglass and steel) runs $1,800–$4,500 installed for a standard 36-inch unit including new trim, weather seal, and hardware; double-door grand entries and custom wood doors run higher. Sliding patio doors and French doors run $2,500–$6,000 for standard sizes, and triple-panel multi-slide or pocketing patio doors run $8,000–$25,000+. We're a full envelope contractor, so doors, windows, siding, and trim all get coordinated as one project if you want them done together.

Question 11

Will new windows actually lower my power bill in Upstate SC?

Accepted Answer

Yes — modestly, and more than you'd expect on older homes. Replacing single-pane or worn 1990s aluminum windows with modern Low-E double-pane vinyl typically cuts cooling-season heat gain 25–40%, which on a $200/month summer bill translates to $30–$70/month in savings. The payback period is usually 8–15 years on energy alone, but the comfort improvement (no more hot spots near south-facing windows, no more cold drafts in January) is immediate. The bigger value is comfort plus the resale and curb-appeal lift.

Question 12

Do new windows reduce outside noise?

Accepted Answer

Significantly. Double-pane Low-E windows with proper installation cut outside noise 30–50% versus original single-pane or builder-grade windows — noticeable if you're near a busy road, a school, or commercial frontage. For high-noise locations, we can spec laminated glass or asymmetric pane thicknesses (often called acoustic glass), which adds another 20–30% noise reduction. Worth the upgrade if road noise is a daily annoyance.

Question 13

How disruptive is a full-home window replacement?

Accepted Answer

Less than you'd expect. Each window is typically out for 30–60 minutes — old unit out, new unit set, insulated, flashed, trimmed. We work room by room with drop cloths and dust containment, and you can stay in the home throughout the project. A 12–18 window full-home replacement is typically 2–4 days on-site. We coordinate around weather and don't open more openings than we can close-and-secure before end of day.

Question 14

Do I need a permit to replace my windows?

Accepted Answer

Most Upstate municipalities require a permit for window replacement, especially when the rough opening changes size or any structural header work is involved. Insert (pocket) replacements that keep the existing frame often skip permits in some jurisdictions. We pull every permit that's required, handle inspections, and never expose you to permit-related problems at resale.

Question 15

What's the warranty on new windows?

Accepted Answer

Material warranties from quality manufacturers run from 20-year limited (vinyl) to lifetime non-prorated on the major architectural brands. Glass-seal warranties (covering fog and seal failure between panes) run 10–25 years depending on manufacturer. We also back the installation labor with our own workmanship warranty — properly flashed, properly sealed openings shouldn't ever leak, and if they do, we come back.

Question 16

Do impact-rated or hurricane windows make sense in Upstate SC?

Accepted Answer

For most Upstate homes, no — we're far enough inland that wind-zone code doesn't mandate impact glass. The exception is homeowners who want hail-resistance or premium security: impact glass is significantly harder to break through, which is a real value-add in some neighborhoods. The premium typically runs 40–80% over standard double-pane. We'll quote both honestly if you want to compare.

Question 17

How long does it take to order custom-sized windows?

Accepted Answer

Standard vinyl windows in common sizes are typically in stock or available within 1–2 weeks. Custom sizes, premium fiberglass, and architectural brands (Andersen, Marvin, Pella) typically run 4–8 weeks from order to delivery, sometimes longer for specialty shapes or grilles. We confirm the lead time in writing with the proposal so the install date is realistic.

Question 18

Should I replace my windows before or after re-siding?

Accepted Answer

If you're planning both within 1–2 years, do them at the same time. Re-siding is the perfect moment to do full-frame window replacements with new pan flashing and proper integration into the new house wrap — you only pay to open up the wall once. Doing siding first and windows two years later means re-cutting your new siding and patching the WRB. We coordinate combined projects often and quote them as one job for the lowest combined cost.

Tier	2026 Range	What's typically included
Vinyl double-pane Low-E	$450–$900 / window installed	Energy Star Southeast-climate glass package, low-expansion foam, pan flashing, painted trim. Right for most standard openings.
Fiberglass	$700–$1,400 / window installed	Best long-term durability in our humidity. Right for sun-exposed elevations and homeowners staying long-term.
Aluminum-clad wood (architectural)	$1,200–$2,800+ / window installed	Andersen / Marvin / Pella class. Right for historic-district work, premium homes, and large picture openings.
Whole-home replacement (12–20 openings)	$8,000–$22,000	Bundled labor pricing, single-day mobilization, manufacturer warranty registered in your name.
Entry & patio doors	$1,800–$25,000+	Steel and fiberglass entries from $1,800; custom wood entries from $5,500; sliding / French patio doors from $2,500.

Windows & Doors in Greenville, SC

Why Greenville Homeowners Choose Four Seasons Building & Remodeling for Windows & Doors

Windows & Doors Scopes We Handle in Greenville

Neighborhoods We Serve in Greenville

Our Windows & Doors Process

What Windows & Doors Costs in Greenville, SC

What a real window install includes

Recent Windows & Doors Projects Near Greenville

Custom Mahogany Front Entry with Sidelights

Full-Home Vinyl Window Replacement with Patio Door Upgrade

What Greenville Homeowners Say

Windows & Doors FAQs — Greenville, SC

Other Services We Offer in Greenville

Windows & Doors in Other Upstate SC Cities

Free Windows & Doors Quote in Greenville

Ready to Start Your Greenville Windows & Doors Project?

Greenville Windows & Doors Quote