Question 1

Do you serve Spartanburg, Spartanburg County?

Accepted Answer

Yes — Four Seasons Building & Remodeling works Spartanburg every week. Spartanburg's east and west side neighborhoods each have their own character — we tailor renovations to fit Converse Heights character or new builds out toward Boiling Springs. As a fully licensed SC general contractor (License #RB52147), we handle every permit and inspection required for flooring in Spartanburg County.

Question 2

How quickly can you start a flooring project in Spartanburg?

Accepted Answer

Most Spartanburg flooring projects can be scoped within a week of your free consultation. Build start depends on permitting and material lead times, but our local crews and supplier relationships keep Spartanburg County projects moving faster than most out-of-area contractors.

Question 3

How much does new flooring cost in Upstate SC?

Accepted Answer

Waterproof luxury vinyl plank (LVP) on 1,500–2,000 sq ft typically runs $8,000–$18,000 installed. Engineered hardwood on 1,200–1,800 sq ft runs $18,000–$38,000. Premium site-finished hardwood or large-format porcelain tile across a main level runs $38,000–$80,000. Pricing depends on material grade, plank width, install method (glue-down, float, nail-down), and how much subfloor prep is needed.

Question 4

What flooring is best for South Carolina's humidity?

Accepted Answer

Waterproof luxury vinyl plank (LVP), porcelain tile, and engineered hardwood all perform very well in Upstate SC's humidity. Solid hardwood can work in climate-controlled homes but is more prone to cupping over slabs or in homes with humidity swings. LVP is the right call for kitchens, bathrooms, lake houses, and homes with pets; engineered hardwood gives the real-wood look with much better dimensional stability than solid.

Question 5

How long does flooring installation take?

Accepted Answer

An average-sized home is typically 3 to 7 days on-site: a day or two for tear-out and subfloor prep, a few days for install, and a day for trim and cleanup. Hardwood usually requires 48–72 hours of in-home acclimation before install. Tile takes longer per square foot than LVP or hardwood. We move furniture and handle all prep work as part of our service.

Question 6

Should I replace my flooring before selling my home?

Accepted Answer

Usually yes for high-visibility areas (entry, kitchen, main living areas) with worn carpet or dated tile — fresh flooring is one of the top three buyer-perceived upgrades in the Upstate market and typically returns 70–85% at sale while also shortening days-on-market. We can recommend cost-effective material choices that maximize return without over-investing for the neighborhood.

Question 7

Can you install flooring over existing floors?

Accepted Answer

Sometimes. Rigid-core LVP and floating engineered hardwood can install over existing hard surfaces (well-bonded tile, vinyl, hardwood) if the substrate is level and sound. Glue-down and nail-down installs require the existing floor to come up. We always inspect the subfloor first and tell you honestly whether install-over saves money or whether tear-out is the right call.

Question 8

Do you partner with Floor & Decor?

Accepted Answer

Yes — we're a longtime Floor & Decor partner and many of our installs use materials homeowners buy there directly, typically saving 20–35% over big-box equivalents on tile and LVP. We can meet you at the Greenville Floor & Decor for a scoping conversation, or work from materials you've already selected. See our Floor & Decor partner page for how this works.

Question 9

What's the difference between LVP and laminate?

Accepted Answer

Laminate has a printed paper top layer over a fiberboard core — it looks like wood but swells permanently when it gets wet. Luxury vinyl plank (LVP) has a printed vinyl top layer over a waterproof PVC or rigid stone-plastic core — it's genuinely waterproof, more dimensionally stable, and far better suited to Upstate kitchens, bathrooms, and any home with pets or kids. We rarely install laminate anymore.

Question 10

How much waste should I plan for?

Accepted Answer

Plan on 8–12% waste for straight-lay LVP and engineered hardwood, and 12–15% for diagonal layouts, herringbone, or large-format tile. We always recommend buying a small attic stash beyond the install need — flooring runs and dye lots change, and having spare planks for a future repair from the exact lot is worth the small extra spend.

Question 11

Do I need to acclimate my flooring before install?

Accepted Answer

Engineered and solid hardwood: yes, 48–72 hours in the home at normal indoor humidity is required by every manufacturer we install. LVP and tile: typically 24 hours minimum. Skipping acclimation is the most common reason for gapping, cupping, or warranty disputes a year or two after install — we don't skip it.

Question 12

Can hardwood be refinished?

Accepted Answer

Solid hardwood can typically be sanded and refinished 4–7 times over its life. Engineered hardwood can be refinished once or twice depending on wear-layer thickness (4mm+ wear layers refinish better than 2mm). LVP and laminate cannot be refinished — when they wear out, individual planks or full areas are replaced.

Question 13

What about the transitions between rooms?

Accepted Answer

We plan transitions during quoting and bring physical samples of T-molds, reducers, and threshold pieces to the assessment so you can see how the join will look. The cleanest result is one continuous flooring material across the entire main level — that's what most of our flooring jobs scope toward, and we'll walk you through whether your current layout supports it.

Question 14

Will the install be dusty?

Accepted Answer

Tear-out of carpet and pad is low-dust. Tile demo is the dustiest stage — we tape off plastic dust barriers, run negative-air HEPA filtration when warranted, and protect HVAC returns. Subfloor grinding or self-leveling produces some dust that's contained to the work zone. The site is vacuumed at the end of each day.

Tier	2026 Range	What's typically included
Luxury vinyl plank (LVP)	$5–$10 / sq ft installed	Upstate workhorse — waterproof, dog/kid-proof, and easy to refresh in 10–15 years. Right for crawlspace homes and high-traffic areas.
Engineered hardwood	$9–$16 / sq ft installed	Real wood veneer on a stable plywood core. Dimensionally stable in Upstate humidity, can be refinished 1–2 times.
Solid hardwood (oak, hickory)	$10–$18 / sq ft installed	Premium choice with a 50–100 year service life and 5+ refinish cycles. Right for slab-on-grade or well-controlled crawlspace homes.
Tile (porcelain or ceramic)	$9–$30 / sq ft installed	Standard formats $9–$18; large-format, wood-look planks, and decorative installs requiring uncoupling membrane $15–$30+.
Hardwood refinish (existing floors)	$4–$8 / sq ft	Sand, stain, three coats of polyurethane. The single highest-ROI flooring project in the Upstate — usually completed in 3–5 days.

Flooring in Spartanburg, SC

Why Spartanburg Homeowners Choose Four Seasons Building & Remodeling for Flooring

Flooring Scopes We Handle in Spartanburg

Neighborhoods We Serve in Spartanburg

Our Flooring Process

What Flooring Costs in Spartanburg, SC

What every flooring quote includes

Recent Flooring Projects Near Spartanburg

Wide-Plank Hardwood Transformation

Wide-Plank White Oak Engineered Hardwood — Main Level

Whole-Home Luxury Vinyl Plank — Pet & Lake-House Ready

What Spartanburg Homeowners Say

Flooring FAQs — Spartanburg, SC

Other Services We Offer in Spartanburg

Flooring in Other Upstate SC Cities

Free Flooring Quote in Spartanburg

Ready to Start Your Spartanburg Flooring Project?

Spartanburg Flooring Quote